Technical Characteristics

Frame
Made of high strength steel. Welded with automatic submerged welding robot after operated in laser and plasma bench. Available for transportation with all kind of load and road conditions.

Frame Equipments
With 24 tons transportation capacity, telescopic legs bolted from below in compliance with SAE standards “king-pin 385/65/22.5 standardized tires and rims, 4 Ro-Ro spacers 24 inner telescopic proving rings”

Brake Systems
In compliance with 71/320 regulation of EEC standards. Double-circuit, dry air pressure, EBS (ABS-ALB) functioned 4S/2M brake system is used. Served standard in T-EBS or RSS stabilized anti-rollover systems.

Electricity Systems
Lighting system in compliance with EEC standards, sidelights, reflector, 2*7 pinned socket set system is used.

Axle and Suspension System
Drum-type double scissor axles are used, every of them has 12 tons transportation capacity, drum is BEY TREYLER brand.

Paint and Surface Protection
Frame is subjected to sanding and surface hardening operation with completely automatic banding system. Later 2 times epoxy primer is practiced. After painting last 2 times with willed RLL code, it is subjected to oven-drying with 60 and 80 degree.

Standard Accessories
Special design rear bumper in compliance with EEC standards, spare wheel well 4 PVC wheel houses, 2 PVC floor mat (for wheel house), 1 water tank 2 rear parking mount roller, side protectors in compliance with EEC standards, tool and food cabinets, tire forklift stopper, rear climbing ladder, tire stop mount, fire extinguisher cabinet, rear warning reflectors sign and warning boards, vehicle introduction labels, Ro-Ro type drum system bumper.